新型4-羟色胺类化合物的合成及生物活性

以4-羟基吲哚为原料,经吲哚环4位乙酰基化、3位亲电取代、酰胺化和还原加氢等反应合成目标化合物7.通过核磁共振氢谱及碳谱对化合物进行结构表征,并对目标化合物进行体外抗氧化生物活性测试.初步生物活性测试结果表明,化合物7a,7b,7c和7d对DPPH·均有很强的清除作用(清除率为85.25%~90.73%),7e,7f,7g,7h作用较差;目标化合物与Vc相比,对·OH的清除作用稍差,最高清除率25.66%(Vc的最高清除率为34.67),但各化合物整体水平相当;在清除O-2·能力上化合物7a,7d,7g,7h最大清除率(分别为19.34,35.35,27.93和31.74)均强于同等浓度的Vc(17.58).     

Synthesis and comparative study on polyetherimides from isomeric 4,4′-isopropylidenediphenoxy bis(phthalic anhydride)s

Two isomers of commercial 4,4′-(4,4′-isopropylidenediphenoxy) bis(phthalic anhydride) (4,4′-BPADA), that is, 3,4′-(4,4′-isopropylidenediphenoxy) bis(phthalic anhydride) (3,4′-BPADA) and 3,3′-(4,4′-isopropylidenediphenoxy) bis(phthalic anhydride) (3,3′-BPADA), were synthesized through aromatic nucleophilic substitution from nitrophthalonitrile and bisphenol A. 3,4′-BPADA was first synthesized from two intermediates, that is, 3-(4-[4-hydroxyphenylisopropylidene] phenoxy) phthalonitrile (3-BPADN) and 3,4′-(4,4′-isopropylidenediphenoxy) bis(phthalonitrile) (3,4′-BPATN). The corresponding three series of polyetherimides (PEIs) were prepared with two representative aromatic diamines (4,4′-oxydianiline and m-phenylenediamine (m-PDA)) via two-step procedure and chemical imidization. Isomeric polyimides showed T_gs from 206 to 256°C in nitrogen and T_d5%s from 488 to 511°C in argon, good mechanical properties (tensile moduli of 2.3–3.3 GPa, tensile strengths of 70–96 MPa, and elongations at break of 3.2%–5.1%), and good solubility. With the introduction of 3-substituted phthalimide unit, PEIs displayed higher T_g values, lower strengths and elongations, better solubility and larger d-spacings. The rheological properties of thermoplastic polyimide resins based on the BPADA isomers were investigated, which showed that polyetherimide PEI-3b derived from 3,3′-BPADA and m-PDA had the lowest melt viscosity among the isomers, indicating that the melt processibility had been greatly improved.     

Vitamin A and Bone Health: A Review on Current Evidence

Vitamin A is a fat-soluble micronutrient essential for growth, immunity, and good vision. The preformed retinol is commonly found in food of animal origin whereas provitamin A is derived from food of plant origin. This review summarises the current evidence from animal, human and cell-culture studies on the effects of vitamin A towards bone health. Animal studies showed that the negative effects of retinol on the skeleton were observed at higher concentrations, especially on the cortical bone. In humans, the direct relationship between vitamin A and poor bone health was more pronounced in individuals with obesity or vitamin D deficiency. Mechanistically, vitamin A differentially influenced the stages of osteogenesis by enhancing early osteoblastic differentiation and inhibiting bone mineralisation via retinoic acid receptor (RAR) signalling and modulation of osteocyte/osteoblast-related bone peptides. However, adequate vitamin A intake through food or supplements was shown to maintain healthy bones. Meanwhile, provitamin A (carotene and β-cryptoxanthin) may also protect bone. In vitro evidence showed that carotene and β-cryptoxanthin may serve as precursors for retinoids, specifically all-trans-retinoic acid, which serve as ligand for RARs to promote osteogenesis and suppressed nuclear factor-kappa B activation to inhibit the differentiation and maturation of osteoclasts. In conclusion, we suggest that both vitamin A and provitamin A may be potential bone-protecting agents, and more studies are warranted to support this hypothesis.     

Emission behavior of naphthalimide-coumarin cassette

ABSTRACT

In this contribution, a dye (C₈-alkyl substituted Naphthalimide-Coumarin, CNC) with naphthalimide and coumarin incorporated together with -NHN = bridge unit. The compound was fully characterized by NMR and HRMS spectroscopic techniques. Highly emissive character was investigated in detail in various polar environments. The emission maximum varied from 430 to 470 nm. In polycarbonate film, CNC is also highly emissive with 560 nm emission peak. While in sold, the emission maximum was further shifted to 580 nm due to the more tightly packing mode than that in film. The C₈-alkyl substitution enhances the solubility of CNC and also contributes most to its solid emission.     

Salen–Mg-doped NH2–MIL-101(Cr) for effective CO2 adsorption under ambient conditions

A novel metal-doped metal–organic framework (MOF) was developed by incorporating salen–Mg into NH₂–MIL-101(Cr) structure under ambient conditions. The Schiff base complex was successfully prepared by condensing salicylaldehyde with a free amino group and then coordinating metal ions. Such a structure can endow the sample with higher CO₂ adsorption performance. At 0°C and 1 bar, the salen–Mg-modified sample achieves the maximum adsorption capacity of 2.18 mmol g⁻¹ for CO₂, which was 5.8% higher than the pristine salen–MOF under the same conditions. Notably, the Freundlich model indicates that the CO₂ adsorption process of all samples conforms to reversible adsorption. However, the correlation coefficients (R²) of the Mg-doped sample are lower than that of the pristine sample. Besides, the CO₂/N₂ adsorption selectivity and isosteric heat also show a similar trend. These results indicate that the salen–Mg can enhance the interaction between the material and CO₂ molecules.     

Spectrum–effect relationship of antioxidant and anti-inflammatory activities of Laportea bulbifera based on multivariate statistical analysis

Laportea bulbifera, named Hong He Ma in Chinese, is a Chinese herbal medicine commonly used by the Miao nationality of China. In this study, 43 batches of L. bulbifera were collected from different origins in China. Ethanol, ethyl acetate and petroleum ether were used to prepare different extracts of the plant. UHPLC technique was used to establish the fingerprints, whereas DPPH assay and RAW264.7 inflammatory cell models were used to evaluate the antioxidant and anti-inflammatory activities, respectively. Moreover, the spectrum–effect relationship between relative peak area of common peaks and efficacy value was set up by multivariate statistical analysis. Furthermore, 10 batches were selected randomly for validation of those models. The results showed that ethyl acetate and petroleum ether extracts possess excellent antioxidant and anti-inflammatory activities, respectively. Peaks A₆ and A₇ demonstrated the greatest antioxidant activity, while peak A₁₇ showed the strongest anti-inflammatory activity. After a verified experiment, the result was obtained and illustrated that the spectrum–effect relationship which we established could reliably infer antioxidant and anti-inflammatory compounds of the Chinese herbal medicine.     

Chemical composition and anti-complement activity of Glechomae Herba collected in different months

Glechomae Herba (GH) is derived from the dried aerial part of Glechoma longituba (Nakai) Kupr., which is harvested from spring to autumn. It has the effects of clearing heat and detoxification. The aim of this paper was to study the chemical composition and the anti-complement activity of GH collected in different months. Ultra-high-performance liquid chromatography coupled to quadrupole time-of-flight tandem mass spectrometry based on predicted compounds screening and diagnostic ion filter strategy was developed for identifying the chemical composition of GH collected in different months. A total of 102 compounds—40 chlorogenic acids (CGAs), 32 phenolic acids, and 30 flavonoids—were reasonably identified in GH. Thirty-four CGAs were discovered in GH for the first time. The correlations between chemical compositions and anti-complement activities of GH collected in different months were analyzed. Phenolic acids and flavonoids were found to be negatively correlated with anti-complement activity, and CGAs were positively correlated with anti-complement activity. At the same time, six CGA standards had obvious anti-complement activity. It was demonstrated that different harvest months had a significant impact on the difference in chemical composition and anti-complement activity of GH. And CGAs might play an important role in the anti-complement activity of GH.     

Kinetics of hydrogen peroxide decomposition catalyzed by Cu-buserite over a well-sealed and thermostated kinetics assembly

Herein a well-sealed and thermostated kinetics assembly is designed and built, which can run stirred at different reaction temperatures. With the reaction assembly above and the volumetric method together, the hydrogen peroxide (H₂O₂) decomposition reaction kinetics is systematically investigated under a variety of reaction conditions over a copper-doped buserite-type layer manganese oxide (referred to as Cu-buserite) as a heterogeneous catalyst. The overall second-order rate law is fitted out by the linear regression analysis, with the reaction orders with respect to both H₂O₂ and Cu-buserite determined to each be equal to 1, and then explicitly explained by the proposed Michaelis-Menten like mechanism. The apparent activation energy E_a is estimated as 33.5 ± 2.5 kJ mol⁻¹.     

Engineering Bifunctional Host Materials of Sulfur and Lithium-Metal Based on Nitrogen-Enriched Polyacrylonitrile for Li–S Batteries

Lithium–sulfur batteries (LSBs) still suffer from the shuttle effect on the cathode and the lithium dendrite on the anode. Herein, polyacrylonitrile (PAN) is developed into a bifunctional host material to simultaneously address the challenges faced on both the sulfur cathode and lithium anode in LSBs. For the sulfur cathode, PAN is bonded with sulfur to produce sulfurized PAN (SPAN) to avoid the shuttle effect. The SPAN is accommodated into a conductive 3D CNTs-wrapped carbon foam to prepare a self-supporting cathode, which improves the electronic and ionic conductivity, and buffers the volume expansion. Thereby, it delivers reversible capacity, superb rate capability, and outstanding cycling stability. For the Li-metal anode, PAN aerogel is carbonized to give macroporous N-doped cross-linked carbon nanofiber that behaves as a lithiophilic host to regulate Li plating and suppress the growth of Li dendrite. Combining the improvements for both the cathode and anode realizes a remarkable long-term cyclability (765 mAh g⁻¹ after 300 cycles) in a full cell. It provides new opportunity to propel the practical application of advanced LSBs.